An induction hob that lights up but does not heat the pan is a common complaint. Often the cause is the cookware or a safety setting, and sometimes a component has failed.

Why this happens

Induction hobs heat the pan, not the glass, using a magnetic field. They need a suitable pan placed correctly, a working coil and electronics, and cooling that stops them overheating.

Quick checks you can do safely

  1. Check the pan is magnetic (a magnet should stick to the base) and sits centered on the zone.
  2. Check the pan base is not too small for the zone.
  3. Check the control lock or child lock is switched off.
  4. Wipe the glass clean and dry; water or spills on the controls can interfere.

Common causes

What a technician will check

How to prevent it

When to call a technician

If a zone stays dead, the hob shows repeated error codes or trips the breaker, switch it off and book a technician. Cracked glass should also be replaced.

Our technicians offer Teka kitchen appliance repair at your home across Dubai, including Downtown Dubai, Dubai Marina, DAMAC Hills, Arabian Ranches, Meydan and more. See all Dubai areas we cover or call 058 803 6705 to book.

Frequently asked questions

Why does my hob beep but not heat?
It usually does not detect a suitable pan, or a safety lock is on.

Can I use any pan?
No. It must be magnetic and flat.

Why does it switch off when hot?
Overheating protection, often from poor ventilation or a failing fan.

Do you repair Teka hobs in Dubai?
Yes, on site.

Leave a Reply

Your email address will not be published. Required fields are marked *

Book Now
Built by Digital Diva