An induction hob that lights up but does not heat the pan is a common complaint. Often the cause is the cookware or a safety setting, and sometimes a component has failed.
Why this happens
Induction hobs heat the pan, not the glass, using a magnetic field. They need a suitable pan placed correctly, a working coil and electronics, and cooling that stops them overheating.
Quick checks you can do safely
- Check the pan is magnetic (a magnet should stick to the base) and sits centered on the zone.
- Check the pan base is not too small for the zone.
- Check the control lock or child lock is switched off.
- Wipe the glass clean and dry; water or spills on the controls can interfere.
Common causes
- Unsuitable or off-center pan: Aluminium, glass or small pans may not be detected, so the zone will not heat.
- Control lock or safety setting: Easy to trigger by accident, and the hob may beep or flash an error.
- Overheating protection: If the cooling fan is blocked, the hob may cut power to protect the electronics.
- Coil or electronic board failure: If one zone is dead while others work, the coil or its board may have failed.
What a technician will check
- Test the coil and power board.
- Check the cooling fan and vents.
- Read any stored error codes.
- Inspect the control panel and connections.
How to prevent it
- Use flat, induction-compatible pans.
- Do not slide heavy pans on the glass.
- Keep ventilation openings clear.
When to call a technician
If a zone stays dead, the hob shows repeated error codes or trips the breaker, switch it off and book a technician. Cracked glass should also be replaced.
Our technicians offer Teka kitchen appliance repair at your home across Dubai, including Downtown Dubai, Dubai Marina, DAMAC Hills, Arabian Ranches, Meydan and more. See all Dubai areas we cover or call 058 803 6705 to book.
Frequently asked questions
Why does my hob beep but not heat?
It usually does not detect a suitable pan, or a safety lock is on.
Can I use any pan?
No. It must be magnetic and flat.
Why does it switch off when hot?
Overheating protection, often from poor ventilation or a failing fan.
Do you repair Teka hobs in Dubai?
Yes, on site.